Section : __________________________
 

QUIZ # 8

TEKTRONIC TDS 460A Digitizing Oscilloscope

Directions:  This quiz consists of 1 pages and 10 questions.  All the answers for questions are worth 1 point each. Be sure to place your name and section at the top of this page.
 

The following statements are either True or False :

1. The Tektronic TDS 460A Digitizing Oscilloscope has a 400MHz maximum analog bandwidth.

2. The Tektronic TDS 460A is intended to operate from a power source that will not apply more than 250 Vrms between the supply conductors or between either supply conductor and ground.

3.  AC coupling in the Tektronic TDS 460A passes only the alternating components of an input signal above 10 Hz in 1-Mohm coupling, and above 100 KHz in 50 Ohm coupling.

4. Each time it takes a sample, the oscilloscope digitizer produces an analog representation of the signal.

5. If you select 50 Ohm impedance with AC coupling, the digitizing oscilloscope will not accurately display frequencies under 200 KHz.
 

Complete the following statements :
 

6. The slope determines whether the ______________________ finds the _________________ on the ___________________ or the ____________________ of a signal.

7. The measurement system of the digitizing oscilloscope provides numeric information on the displayed waveforms through _______________ , _______________ and __________________ measurements.

8. Acquisition is the process of ___________________ the analog input signal, ________________ it into digital signal, and assembling it into ______________________ .

9. List what kind of cursors are available in the cursor menu:
 

10. In real – time sampling, the oscilloscope ______________________ all the points it acquires _____________________ .