Name: _____________________________

Section : __________________________

QUIZ #6

Reference Data for Engineers 5-17 to end

HP 8116A 50 MHz Function Generator

HP 5314A Universal Counter

Fluke PM6304 RCL Meter

Directions: This quiz consists of 2 pages and 20 questions. All the answers for questions are worth 1 point each. Be sure to place your name and section at the top of this page.
 
 

The following statements are either True or False :

1.    Moisture has great effect on the dielectric properties of plastic films, and capacitors made from them require more protection     than paper/ mica types.

2.    Printed circuit construction is ideal for assembly of circuits that employ miniature solid state components.

3.     In a HP8116A a DC output voltage is generated when all waveform selection keys are deactivated .

4.    In TRIG mode of HP8116A, each active input edge triggers more than one output cycle.

5.    The maximum output frequency in a burst mode in HP8116A is 40MHz.

6.    The available pulse width ranges are not limited by the current output frequency in a HP5314A Universal counter.

7.    The HP5314A Universal counter is a Safety Class 1 instrument designed according to International safety standards.

8.    In HP5314A, all period measurements are made through the A channel input.

9.    HP 5314A does not have a built-in self check function.

10.   Resistor, inductor and capacitors are ideal electrical components and have no secondary effects that limit their performance.

     

    Complete the following:

11.    The ___________________ flowing between two or more electrodes by any path other than the

inter-electrode space is termed the ________________________ and the ratio of this to the test voltage is

the _________________________.
 
 

12.    There are _____________________ broad classes of capacitors. Namely, ______________________,

_____________________________, _____________________________ .
 
 

13.    A printed circuit is a _________________ circuit pattern on one or both side of a

____________________ substrate.
 
 

14.    The frequency range of HP8116A is ____________________________________________.
 
 

15.    The Standard Parameter Set exists for two reasons. Namely,

_________________________________, _______________________________________.
 
 

16.    Output level in HP8116A can be set in terms of ________________ or in terms of

_____________________.
 
 

17.    The HP5314A has frequency range of _____________________________________ .
 
 

18.    The component measurement in PM6304 is based on the ______________________ technique.
 
 

19.    PM6304 has frequency range from __________________________________ .
 
 

20.    Self – resonant frequency in a RLC circuit is f 0 = ________________________ .